ChiefsPlanet Mobile
Page 152 of 345
« First < 52102142148149150151152 153154155156162202252 > Last »
Nzoner's Game Room>Off Season Lets Talk Guns, Part 2
HonestChieffan 11:58 AM 01-23-2011
Been a while since we had a guns n' ammo discussion.


Some of you are AR shooters Im sure. Im looking at a Colt 6920. Will be my first AR. Picked up a Glock this fall and really enjoy shooting it. Any feedback on that weapon?



Anyone else been in a buy/sell/trade mood with hardware?
[Reply]
Raiderhater 08:35 PM 05-19-2019
Originally Posted by DenverChief:
I didn't know you could get the 10mm in a 1911 model
One of the two first 10mm handguns back in the 80’s was a 1911 - the Colt Delta Elite. In fact, that pistol helped bring some legitimacy to the new round.
[Reply]
Frazod 08:43 PM 05-19-2019
I've never owned or even shot a 10mm. I know they're nearly identical in size to .40. Will a gun chambered in 10mm shoot a .40 round, or vice versa?
[Reply]
Megatron96 08:50 PM 05-19-2019
Originally Posted by Frazod:
I've never owned or even shot a 10mm. I know they're nearly identical in size to .40. Will a gun chambered in 10mm shoot a .40 round, or vice versa?
The difference between the .40 S&W and the 10 mm is case length. Projectile diameter is identical.

I've heard that there are guns that will chamber and fire both, however, everything I've read says this is not recommended.

You should not try to chamber a 10mm in a .40 S&W chambered gun. It shouldn't go into battery anyway, due to the shorter throat, but there's also the issue of pressure.
[Reply]
Frazod 08:53 PM 05-19-2019
Originally Posted by Megatron96:
The difference between the .40 S&W and the 10 mm is case length. Projectile diameter is identical.

I've heard that there are guns that will chamber and fire both, however, everything I've read says this is not recommended.

You should not try to chamber a 10mm in a .40 S&W chambered gun. It shouldn't go into battery anyway, due to the shorter throat, but there's also the issue of pressure.
Thanks. I didn't know if it was the same deal as a .38/.357.
[Reply]
Megatron96 11:08 PM 05-19-2019
Originally Posted by Frazod:
Thanks. I didn't know if it was the same deal as a .38/.357.
It's a good question. In fact, when I first considered a 10mm about 9 years ago, I had the exact same question. I mean, it would be pretty nice if you could run .40 and 10 in the same gun, exactly like ..357 mag/.38 spl.
[Reply]
kjwood75nro 11:55 PM 05-19-2019
Originally Posted by DenverChief:
Also, just curious on opinions...I traded a safe queen pistol I had for a Springfield XDM a few years back, While I don't hate the pistol, I don't adore it either....was thinking about trading it in....maybe a Glock 20 or 21? Thoughts?
No complaints here about the Glock 21 (or any Glock I've used), but make sure to get the SF. Better hand feel, less blocky.

I recently purchased my issued Gen 3 21SF from my agency as they had upgraded us to the Gen 4. 8 years running, no issues, fired extensively, not cleaned as meticulously as the armorers would've liked, yet it never failed to operate.

Ate just about every type of ammo, save for some Hornadys with a red rounded bullet tip that would snag on the magazine because it had a rubbery texture.
[Reply]
Dallas Chief 06:14 AM 05-20-2019
Originally Posted by DenverChief:
Mossberg?
Thanks! That confirmed my thinking. Pump or semi-auto? Because I still have small children, I’m leaning towards pump for household safety reasons. Make sense?
[Reply]
tatorhog 01:16 PM 05-20-2019
Originally Posted by Dallas Chief:
Thanks! That confirmed my thinking. Pump or semi-auto? Because I still have small children, I’m leaning towards pump for household safety reasons. Make sense?
Spend a couple hundred more and buy a used Nighthawk Tomahawk. MSRP is kinda high, and its applications are pretty limited, but its definitely fun as hell to shoot. A friend sold his online for only like $900, and he had extra goodies with it, so I imagine $700 should get a decent one, in used condition.
[Reply]
Megatron96 07:08 PM 05-20-2019
So yesterday I went to my Advanced Skills Defensive Handgun class again, but for the first time we learned the Basics of CAR training (Center Axis Relock). For anyone not familiar, Center Axis Relock is a defensive handgun method developed by the recently deceased Paul Castle, former LEO, which can be seen in the various John Wick series.

The CAR method is a shooting system primarily intended for close quarters battle focusing on weapon retention, the body's instinctive response mechanisms, improved recoil control, and aimed point shooting.

I'm not going to go into detail about the particular drills we ran; I just wanted to share some observations I made while I was there.

First observation: out of 13 shooters, all but 3 showed a dramatic improvement in accuracy almost immediately. What I mean by accuracy, as opposed to precision, is that most shooters immediately shot more consistent groups. Several shooters that I've seen before suddenly eliminated dropping shots. The groups weren't significantly tighter than the groups they shot previously, but the outlier shots 6-12 inches away from the rest of the group failed to appear.

The three other shooters were all older, much more advanced shooters that all had a little trouble using the new technique. That includes myself; old habits kept me from consistently getting into the correct posture/mechanics to shoot from a proper CAR position. My body kept wanting to revert to modified Weaver and my hands kept trying to hold the gun vertically instead of canted.

When I did manage to do it correctly (when I slowed down), while my groups were still larger than what I'm used to, they were all nearly perfectly centered in the A-boxes (ISPC targets). Discussions with the other two more advanced shooters revealed the same issues and consequent results.

Second observation: headshots, usually an issue with less accomplished shooters, were suddenly much easier, even for myself. But what was really eye-opening was how many shooters I'd observed several times in the past that consistently couldn't get more than a couple hits inside the head A-box, suddenly be able to consistently get 7-10 almost from the get-go. Two of them went 10 for 10.

Third observation: one of the harder things for newer shooters to do well at first is shoot at multiple targets (transitions) and get consistent A-box hits, unless they slow the drill way down. The standard drill for this class is 4 targets at 7 yards. Par is 10 seconds from the draw. For a competent shooter, I've seen times in less than 7 seconds. For the uninitiated, I've seen times as long as 30 seconds.

One shooter in particular, who I've seen several times already, usually takes about 20 seconds for the drill, and rarely gets more than two A-box torso hits in a run. Yesterday, she ran the drill three times, with her worst run in 11 seconds, and only missed an A-box once in three runs! In particular, her recoil control was exponentially better yesterday than I've ever seen from her. She almost looked like a pro, with barely any muzzle flip, no chronic readjust of her grip, no hunting for her sight picture, etc.

More impressive was her three headshots: in the past, her average was about 30 seconds for three headshots, and most of the time she'd maybe get one good hit in the A-boxes. The other shots were usually complete misses, or maybe clip an 'ear.'

Yesterday, she took an average of 3-4 seconds per shot, and hit all three A-boxes! I was so impressed that I involuntarily whooped when she hit that last headshot, nearly perfect center. She's come to the class probably 10 times by now, and I've seen and spoken to her about her frustrations more than once. To see her success was, well, it was heart-warming.

I spoke to her between drills and she admitted she hasn't fired her gun since the last class, over a month ago. Aside: She was ecstatic with the class, the CAR Method, and her dramatic improvement.

Fourth observation: after just one drill, and the general success/improvement in performance, the excitement of the entire class was palpable. Usually after a drill or two, there's some discussion, students speaking with the instructor or each other about what they're doing wrong, how can they fix this or that issue. Essentially frustrations. Not yesterday. All conversations were about how surprised everyone was with their own successes and what we were going to learn next.

Anyway, I just wanted to share this. I know there's probably a lot of uncertainty about the true value of CAR method, due to a lot of people thinking it's just a Hollywood movie gimmick, but after my first experience with it, my opinion is firmly 'give it an honest try and see what happens.'

I was personally on the fence about CAR. Now I'm serious about learning more about it.
[Reply]
Megatron96 07:11 PM 05-20-2019
Originally Posted by Frazod:
Thanks. I didn't know if it was the same deal as a .38/.357.
Found this thread on thefiringlineforums.com and thought you might like to peruse.

https://thefiringline.com/forums/sho...+shooting+10mm
[Reply]
DenverChief 09:03 PM 05-23-2019
Originally Posted by Dallas Chief:
Thanks! That confirmed my thinking. Pump or semi-auto? Because I still have small children, I’m leaning towards pump for household safety reasons. Make sense?
I mean yes, the pump can be harder to work....I love my Mossberg tactical shotgun. I haven't shot it in quite some time but it is perfect for home defense (for shotguns)
[Reply]
GloryDayz 09:09 PM 05-23-2019
Got a guy who I work with who might be looking to sell me an M9, if it happens, that would be a step back in time for me...

We'll see, I hardly need it and it wasn't my favorite weapon anyway, but it might be nice if he decides to sell and I feel like having another 9.
[Reply]
DenverChief 09:09 PM 05-23-2019
So I bought a couple of Mec-Gar 8 round mags for my new 1911 (Girsan). I was having an issue with the OEM mag when it was fully loaded (8 rounds) it would fail to feed in the pistol. The round would be stuck between the mag and the chamber. It only happened on fully loaded mags. Bought the Mac-Gars and was-lah all fixed. Now to go shooting tomorrow :-)
[Reply]
DenverChief 09:09 PM 05-23-2019
Originally Posted by GloryDayz:
Got a guy who I work with who might be looking to sell me an M9, if it happens, that would be a step back in time for me...

We'll see, I hardly need it and it wasn't my favorite weapon anyway, but it might be nice if he decides to sell and I feel like having another 9.
as in 92FS Beretta? yuck.....
[Reply]
Frazod 09:11 PM 05-23-2019
Originally Posted by Megatron96:
Found this thread on thefiringlineforums.com and thought you might like to peruse.

https://thefiringline.com/forums/sho...+shooting+10mm
Interesting - especially the linked video. I guess my takeaway is shooting .40 out of a 10mm pistol will work in a pinch, but I wouldn't recommend making a habit out of it.

In any event, I have no plans to buy another .40 or a 10mm. But it never hurts to know things. :-)
[Reply]
Page 152 of 345
« First < 52102142148149150151152 153154155156162202252 > Last »
Up